RECALL NOTICE - SAVAGE ARMS B.MAG BOLT (17 WSM)

Voir en Français


August 24, 2015

Savage Arms has discovered that the bolt on some B.MAG rifles may inadvertently catch the safety button and slide it forward into the "fire" position. This condition is primarily present if downward pressure is applied to the bolt too early while pushing it forward. While Savage has received no reports of accidents due to this condition, we have decided to offer free retrofits of all B.MAG rifle bolts out of an abundance of caution and in our ongoing commitment to quality and safety.

To avoid possible unintentional discharge or injury, do not use your B.MAG rifle until your bolt has been retrofitted with a new bolt handle and cap. For instructions on receiving your free bolt retrofit, see the information below. The bolt retrofit includes the replacement of the existing bolt handle and bolt cap with a revised bolt handle and bolt cap. The correct, revised parts are easily identified in the images below.


Products Affected By Recall

Savage Arms B.MAG Rifle Bolts


What You Need to Do

To avoid possible unintentional discharge or injury, do not use your B.MAG rifle until your bolt has been retrofitted with a new bolt handle and cap.  

Left: Existing bolt handle. Right: Revisited bolt handle with detent mark on arm.


Left: Existing tapered bolt cap. Right: Revisited blunt bolt cap.


To avoid serious injury or death with any rifle, observe these precautions:
Savage Arms is the leader in accuracy, quality and value, and we stand behind our products. We sincerely apologize for any inconvenience this may cause you.
 
 

Resources

Written Retrofit Instructions (.pdf)
Frequently Asked Questions (.pdf) 


Questions

For other questions related to this bolt recall, call us at (800) 370-0708 Monday through Friday 8am to 5pm EST.