How to Adjust the MDT LSS XL Chassis

07/18/2023
featured image for blog

The ability to adjust the stocks on Savage’s precision rifles is a great innovation. Length of pull and the comb height are all essential to finding proper fit. The better a rifle fits a shooter, the more accurate and comfortable they will be. This step-by-step guide will show you how to adjust the MDT LSS XL Chassis on the 110 Precision stock to fine tune the length of pull and comb height.

MODELS

WARNING! Always keep the muzzle pointed in a safe direction. Make sure your firearm is completely unloaded and ensure that your workspace is void of ammunition at all times. The safety should be set to the Full Safe position.

ADJUSTING THE MDT LSS XL CHASSIS LOP

  1. Place the safety selector into the full safe position. 
  2. Remove the magazine and open the bolt.
  3. Using a 5/32 allen wrench, loosen two rear buttpad screws at least ½ inch (They do not need to be fully removed).How to adjust the MDT LSS XL Chassis screws
  4. Once the screws are loosened, slide the buttpad rearwards and move the spacer to the middle of the exposed screws.
  5. Twist the spacer and the slots in it will allow it to be removed.Adjusting the MDT LSS XL Chassis spacers
  6. To reinstall a spacer, line the screw shafts up with the slots and the spacer can be twisted back into position.
    1. Please be aware that the spacers are contoured to the stock shape and make sure you do not reinstall them upside down or backwards.
    2. The alignment tabs on the spacers should project toward the front of the firearm and will mate securely together.
  7. Once the desired length has been achieved by adding or removing spacers, push the buttpad back snug against the rest of the stock assembly, and retighten the buttpad screws, taking care not to overtighten them.

HOW TO ADJUST THE MDT LSS XL CHEEK PIECE

  1. To adjust the 110 Precision cheek piece, use a 1/8” allen wrench to loosen the plug screws that hold the cheek piece in place.Adjusting the MDT LSS XL Chassis cheek Piece
  2. Slide the cheek piece to your desired and while holding at that position retighten the screws.

For more on how length of pull and rifle fit impacts accuracy, check out this article. If you have any questions please refer to your owner’s manual and call our customer service team at 1-800-370-0708 (Monday-Friday, 8am-5pm ET)